Click Here

 

 

On this page below you can get some outstanding guidance related to What Would Cause My Electric Water Heater to Stop Working?.

Numerous contemporary houses use an electrical hot water heater for their furnace, as a result of its convenience and ease of use. However, just like any other electrical appliances, problems may arise with its usage, unexpectedly. It can be really frustrating to wake up to a cold shower instead of a warm one or having your bathroom with water that isn't warm adequate or perhaps as well warm. Whatever the situation may be, hot water heater troubles can be rather stressful. Luckily, we've made a listing of possible solutions to your water heater concerns. There are a variety of aspects that might trigger a lot of these problems, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the primary power supply for security. Whatever the problem is, getting it fixed need to not present excessive of an issue if you follow these actions:

 

Call An Expert:

If after replacing all faulty components as well as resetting your temperature, the water heater still isn't functioning, you may need to speak to a specialist plumber for an expert opinion. The trouble with your heating unit could be that the hot and cold faucets have actually been switched or it might be undersized for the quantity of hot water required in your home. Whatever the case might be, an expert plumber would assist solve the trouble.

 

Inspect Your Power Supply:

As standard as this may seem, it is really necessary. Without ample power, your water heater will certainly not work. So the first thing to do when your water suddenly retires is to confirm that it isn't a power trouble. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the issue, just turn it on and off again. Change any busted or worn-out fuse. Examine the home appliance with power after these adjustments to see if it's now functioning.

 

Inspect Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't hot sufficient, you may require to check the temperature level settings on your upper thermostat. Make certain the circuit breaker is turned off before doing anything. Open up the access panel as well as press the red switch for temperature reset over the thermostat. This should assist heat the water. Turn the breaker back on and inspect if the problem has been settled.

 

Check the Burner in the Water Heater:

If it's not a power issue, then try looking into your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any of them. If any one of them is damaged, replace that part and afterwards check whether the hot water is back on.

 

Final thought

Hot water heater problems are not constantly significant. Many of them are because of small concerns like a blown fuse or worn-out heating element. Changing the damaged parts ought to work. Nonetheless, if you are still unable to resolve the issue, give a call to your local plumber to come to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I'm just very eager about Hot Water Heater Repair and I'm hoping you appreciated the new article. Please take the opportunity to distribute this blog posting if you appreciated it. I treasure reading our article about Hot Water Heater Repair.

Book Service Now